What is a pre-drywall inspection?

A pre-drywall inspection is a comprehensive evaluation of a new construction home's structural framing, electrical wiring, plumbing, HVAC systems, air sealing, fire blocking, and weather-resistive barrier performed after rough-in work is complete but before drywall installation begins. This is your only opportunity to visually inspect and document these critical systems before they are permanently concealed behind wall and ceiling coverings. The inspection helps to verify compliance with the engineer's design drawings, the 2024 International Residential Code (IRC), 2023 National Electrical Code (NEC), and manufacturer installation requirements.

When should I schedule a pre-drywall inspection?

Schedule your pre-drywall inspection after all rough-in work is complete—including framing, electrical, plumbing, HVAC, and insulation—but before insulation and siding/masonry installation begins. Most builders provide 3-7 days notice before installing insulation. Contact your builder to request notification when rough-ins pass municipal inspection, then schedule your third-party inspection immediately. Prompt scheduling is essential as availability cannot be guaranteed.

How much does a pre-drywall inspection cost in Austin?

Most inspectors offer a visual assessment only and charge between $350 to $600. A Constructiva pre-drywall inspection is much more in-depth and costs range from about $800 to $1,200 depending on home size. Larger homes over 6,000 square feet cost more. This investment is minimal compared to the cost of opening finished walls to repair concealed defects—which can run $5,000 to $20,000 or more.

What's the difference between a municipal inspection and a third-party pre-drywall inspection?

Municipal inspections verify minimum code compliance and are performed by city inspectors with limited time per house—often 5-20 minutes. Third-party pre-drywall inspections are comprehensive evaluations lasting 2-4 hours, performed by an inspector working exclusively for you. Third-party inspections go beyond minimum code to evaluate installation quality, manufacturer specifications, plans (if available) and industry best practices. They also include detailed photo documentation and written reports you can use for builder negotiations. Municipal inspections provide no documentation to homeowners.

What's the difference between you and the builder's third-party pre-drywall inspection?

The builder's third-party inspector is hired by the builder to verify minimum code compliance for their building permit. Their report goes to the builder and maybe the municipality, but not to you. As your independent new construction inspector, I work exclusively for you with loyalty to the buyer, not the builder or their schedule. I inspect beyond minimum code identifying workmanship issues, potential defects, and items that meet code but may cause future problems. You receive the full report with complete documentation and photos for future use. I advocate for your interests if conflicts arise, with no conflicts of interest since I'm not approved, referred, or influenced by the builder.

Will the builder fix issues found in my pre-drywall inspection?

Reputable builders are usually pretty good at correcting code violations and installation deficiencies identified in pre-drywall inspections. A professional inspection report with specific code references and photo documentation makes this straightforward so that builders can direct their subcontractors to exact locations and understand exactly what needs correction. Some builders initially resist third-party inspections but most come to appreciate the quality control. If a builder refuses reasonable corrections, the documented report provides leverage and, if necessary, evidence for warranty claims or legal action.

Is a pre-drywall inspection worth it?

Pre-drywall inspection is one of the highest-value investments in new construction. For $800-$1,200, you get documentation of systems that will be hidden for the life of your home. Repairs at this stage cost the builder minutes to hours of labor. The same repairs after drywall require cutting open walls, making repairs, then patching, texturing, and repainting—often $5,000-$20,000+ depending on scope. Pre-drywall inspection also establishes documentation if problems emerge later, protecting your warranty rights and providing evidence if disputes arise.

What codes apply to new construction in Texas?

New construction in Texas follows the 2023 National Electrical Code (NEC) for electrical installations but the structural, plumbing, and mechanical systems follow the International Residential Code (IRC) whose adopted version will vary depending on the municipality. For example, Austin has adopted the 2024 IRC, however many surrounding towns are on the 2021. Texas also requires compliance with the International Energy Conservation Code (IECC) for insulation and energy efficiency. Local jurisdictions may adopt amendments.

Do you offer bilingual inspection services?

Yes. Constructiva Realty Inspections provides verbal bilingual services in English and Spanish. This includes on-site inspection communication, phone consultations, and builder discussions, however the report will be in English for legal reasons.

Courses Archive - Constructiva

October 11, 2025

Published by Inspecciones Constructivas on October 11, 2025

Final vs. Warranty Inspections

Open to access this content